Patient Isolation Carrier
INTRODUCTION
WS-N-01 is a compact patient isolation carrier type transport equipment, designed to prevent secondary infection from confirmed or suspected cases of infectious diseases during transportation.
CHARACTERISTICS
Category |
Specifications |
Model |
WS-N-01 |
Airflow rate (m3/h) |
35 |
Dimensions (mm) |
1930L x 550W x 440H |
Power |
DC 12V |
Pressure (Pa) |
up to -15 |
Noise level (dB) |
58 |
HEPA filter |
99.999%, 0.3 µm |
Weight (kg) |
10 |
CERTIFICATION
CE
In accordance to Regulation (EU) 2017/745, WS-N-01 Medical device class 1
has been designed to comply with the requirement of the following Harmonized Standard:
EN ISO 13485:2016
EN 1789:2007 + A1:2010
EN 61000-6-3:2007/A1:2011/AC:2012
KGMP
Certified, that Wosem Co., Ltd. manufacturer complies with Korea Good Manufacturing Practices of Medical Devices.
SPECIFICATIONS
Airframe Design
● CT Scannable (It fits and doesn’t interfere with CT machines)
● Low cost
● Light weight
● Simple installation (Less than 5 minutes)
● Easy to disassemble and stock (carry-on bag enclosed)
Features
● Check and control pressure level and battery remains through the display screen
● H14 class HEPA filter attached to keep the exhaust air safe
● Easy to replace used HEPA filter
● Waterproof zippers
● Built-in gloves with sleeves
● Battery remains for 6 hours and can be charged while in use
● Additional 2 hours usage with auxiliary 8 AA size batteries
Patient Isolation Wheelchair
INTRODUCTION
NPW-N-01 The Patient Isolation Wheelchair is a reliable type of transport equipment, designed to prevent secondary infection from confirmed or suspected cases of infectious diseases during transportation on paved roads. Its solid frame and user-friendly design, including large transparent windows and display screen have received good reviews from hospital personnel in Korea and abroad.
CHARACTERISTICS
Category |
Specifications |
Model |
NPW-N-01 |
Air Change rate (m3/h) |
35 |
Dimensions (mm) |
620W x 1350D x 1660H |
Chamber dimensions (mm) |
580W x 1000D x 1445H |
Power |
DC 12V |
Pressure (Pa) |
from -2,5 to -15 |
Noise level (dB) |
65 |
HEPA filter |
99.999%, 0.3 µm |
CERTIFICATIONS
CE
In accordance to Regulation (EU) 2017/745, WS-N-01 Medical device class 1
has been designed to comply with the requirement of the following Harmonized Standard:
EN ISO 13485:2016
EN 1789:2007 + A1:2010
EN 61000-6-3:2007/A1:2011/AC:2012
KGMP
Certified, that Wosem Co., Ltd. manufacturer complies with Korea Good Manufacturing Practices of Medical Devices.
SPECIFICATIONS
Observation windows
● Large transparent window enables the medical staffs to check patient’s condition during transportation.
● First Aid Zippers attached on the side windows for IV injection if needed
Features
● Solid frame : STS304(25mm)
● Check and control pressure level and battery remains through the display screen
● H14 class HEPA filter attached to keep the exhaust air safe
● Easy to replace used HEPA filter
● Waterproof zippers
● Battery remains for 6 hours and can be charged while in use
● Additional 2 hours usage with auxiliary 8 AA size batteries
Energy Recovery Ventilation & Emergency Mode
INTRODUCTION
WS-NHE-01 This device function as Energy Recovery Ventilation (ERV) in ventilation mode. In isolation mode it prevents secondary infection by forming negative pressure in a designated isolation room when self-isolation is required, by cleaning air and preventing viruses from spreading.
GENERAL FEATURES
● PRE filter – grabs large particle dusts
● HEPA filter – grabs fine dust and high-risk pathogens
● Control Pad – installed outside the room to set or check operation mode and negative pressure status inside the room.
● Precise control
● Automatic operation by CO2 Sensor to maintain fresh air quality.
● Air supply mode – supplies fresh air into the house.
● Air exhaust mode – exhausts the inside air out of the house.
SPECIFICATION
Model |
WS-NHE-01 |
WS-NHE-02 |
Dimensions (mm) |
700W*700D*250H |
750W*800D*350H |
Power Consumption |
120W |
360W |
Heat recovery efficiency |
<70% |
<70% |
Supply air volume |
150 m³/h |
500 m³/h |
Exhaust air volume |
150 m³/h |
500 m³/h |
PRE Filter |
5T 300*300*21H |
5T 310*350*21H |
HEPA Filter |
15T 300*300*21H |
15T 310*350*21H |
Motor |
BLDC |
|
Controller |
Wall-mounted / Network System |
|
Ceiling Negative Pressure Unit
INTRODUCTION
Ceiling Negative Pressure Unit can be installed on the ceiling of the patient rooms to convert it into a temporary Negative Pressure Isolation Room(NPIR) in case of an emergency case related to infectious diseases. After the use of NPIR is done, our ceiling negative pressure units can be used for ventilation and air purification(optional).It takes much less time and cost then constructing a typical NPIR.
CHARACTERISTICS
COVER RANGE
Ceiling Negative Pressure Unit applicable for up to 100㎥ ±15% room
GENERAL FEATURES
Aerodynamic design presents significantly less noise and vibration compared to other similar products PRE filter grabs large particle dusts HEPA filter grabs fine dust and high-risk pathogens Digital display installed outside the room to check the negative pressure status inside the room. Air volume adjustable by BLDC motor (0 ~ 25 CMM)
NETWORK SYSTEM (Optional)
Built-in RS485 network system allows you to check and control the negative pressure status and filter replacement cycle of the rooms at the central management room.
